3Com WXR100 3CRWXR10095A - Manual (Page 569)

display igmp receiver-table 569
See Also
„
set igmp querier on page 581
display igmp
receiver-table Displays the receivers to which a WX forwards multicast traffic. You can
display receivers for all VLANs, a single VLAN, or a group or groups
identified by group address and network mask.
Syntax — display igmp receiver-table [vlan vlan-id]
[group group-ip-addr/mask-length]
„ vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, MSS displays the multicast receivers on all VLANs.
„ group group-ip-addr/mask-length
— IP address and subnet mask
of a multicast group, in CIDR format (for example, 239.20.20.10/24).
If you do not specify a group address, MSS displays the multicast
receivers for all groups.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays all multicast receivers in
VLAN orange:
WX1200# display igmp receiver-table vlan orange
VLAN: orange
Session Port Receiver-IP Receiver-MAC TTL
--------------- ---- --------------- ----------------- -----
224.0.0.2 none none none undef
237.255.255.255 5 10.10.10.11 00:02:04:06:08:0b 179
237.255.255.255 5 10.10.10.13 00:02:04:06:08:0d 179
237.255.255.255 5 10.10.10.14 00:02:04:06:08:0e 179
237.255.255.255 5 10.10.10.12 00:02:04:06:08:0c 179
237.255.255.255 5 10.10.10.10 00:02:04:06:08:0a 179