3Com WXR100 3CRWXR10095A - Manual (Page 39)

RADIUS Ping Utility 39
RADIUS Ping Utility A command provides a diagnostic tool to enhance troubleshooting
capabilities for RADIUS servers on the network.
radping This command sends an authentication request to the RADIUS server to
determine if it is offline.
Syntax —
radping {server | servername | group servergroup}
request [acct-off | acct-on | acct-start | acct-stop |
acct-update | authentication] user username password password
auth-type {plain | mschap2}
„ servername
— Name of a RADIUS server configured to perform remote AAA
services for WX switches.
„ servergroup — Name of a RADIUS server group configured to perform
remote AAA services for WX switches.
„ acct-off, acct-on, acct-start, acct-stop, acct-update
—
Send accounting requests to the RADIUS server to collect and start or stop user
statistics.
„ authentication — Send an authentication request to the RADIUS server.
„ username — A user name configured on the RADIUS server.
„ password
— The password configured for user.
„ auth type {plain | mschap2} — Authentication type used by the RADIUS
server or server group.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 6.2.
Examples — To verify that a RADIUS server alpha with the username
smith5 and password swordfish is active on the network, use the
following command:
WX# radping alpha request authentication user smith5 password
swordfish auth-type mschap2
Sending authentication request to server test-27708
(10.20.30.40:1812)