3Com WXR100 3CRWXR10095A - Manual (Page 62)

62 N EW F EATURES S UMMARY
There are two possible forms for the display service-profile
command:
„ display service-profile name
„ display service-profile name area area_name
where
name
is the service profile name and
area_name
is one of the
following formats:
„ general
„ options
„ crypto
„ ssid
„ wep
„ web-portal
„ soda
„ misc
„ 802.11
The attributes of a service-profile are grouped into nine different areas
(attributes). The display format of the output is as follows:
General attributes
SSID name: string
SSID type: string
Options List
Auth {fallthrough (none | last-resort | web-aaa-portal)
DHCP-restrict, SODA} None
Mesh {Bridge, Mesh} | None
CAC {CAC, load-balance-exempt} | None
L2 {No-broadcast, Proxy-ARP, keep-initial-VLAN} | None
802.11 {Beacon, Idle-client-probing} | None
Crypto
Authentication {802.1X. PSK, Shared-key} | None
Encryption {RSN, WPA}| None
Cipher {CCMP, TKIP, WEP40, WEP104} | None
Pre-shared key string*
SSID
Vlan Name string*