3Com WXR100 3CRWXR10095A - Manual (Page 440)

440 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
History —Introduced in MSS Version 3.0. Option auto added for
configuration of the MAP configuration profile. Version 6.0 removed the
dap option.
Usage — To enable or disable one or more radios to which a profile is
assigned, use the set ap radio radio-profile command. To enable or
disable all radios that use a specific radio profile, use the set
radio-profile command.
Examples — The following command enables radio 1 on the MAP 1:
WX1200# set ap 1 radio 1 mode enable
success: change accepted.
The following command enables radio 2 on on MAP 1:
WX1200# set ap 1 radio 2 mode enable
success: change accepted.
See Also
„
clear ap radio on page 356
„
display ap config on page 364
„
set ap radio radio-profile on page 440
„
set radio-profile mode on page 464
set ap radio
radio-profile Assigns a radio profile to a MAP radio and enables or disables the radio.
Syntax — set ap {ap-number | auto} radio {1 | 2}
radio-profile name mode {enable | disable}
„ ap ap-number — Index value that indentifies the MAP on the WX.
„ radio 1 — Radio 1 of the MAP.
„ radio 2
— Radio 2 of the MAP. (This option does not apply to
single-radio models.)
„ radio-profile name — Radio profile name of up to 16 alphanumeric
characters, with no spaces.
„ mode enable — Enables radios on the specified ports with the
parameter settings in the specified radio profile.
„ mode disable — Disables radios on the specified ports.