AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 77)

If your system is not
in North America,
The Automatic
Dialing Plan Rules
button is available.
Country-Relevant Settings
MaxCS 7.5 Administration Manual 61
Figure 25. System Configuration, Country Relevant tab
Setting Toll Call Prefixes
MaxCS 7.5 uses Toll Call Prefixes to determine the type of outside call and imposes restrictions when nec-
essary. For example, if the international toll call prefix is 011 and a user attempts to make an international call
from an extension without international call privileges, the call will be terminated as soon as the user dials 011
after the trunk or route access number. The caller hears an error tone.
The toll prefixes set here should match the dialing plan prefixes for the country set in the General tab (see “Set-
ting General Parameters” on page 45). You can set the following toll call prefixes.
• Domestic . The dialing plan for your country’s domestic long distance prefix. For example, type in a 1 for
1-plus dialing within the U.S. dialing plan (also known as the North American Numbering Plan).
• International . The prefix used for international calls. For example, this is 011 for international calls made
in the U.S.
Setting Emergency Numbers
The number in the Emergency Number field will have the system automatically find a trunk to process the call
without the extension user dialing a trunk access code first. You may enter up to three emergency numbers in
the appropriate fields.
Note: This feature works with both trunk access code and route access code.
Dialing Plan Rules for Non-North American Country
If your MaxCS 7.5 system is in a country other than the U.S.A. or Canada, you can configure a call return rule
based on the country, which will greatly improve the call return feature from Caller ID, Zoomerang, and making
a call from Microsoft Outlook.
Click the Automatic Dialing Plan Rules button. The following dialog box opens: