Ct-bus test tool, Backup and restore utility, Backing up files – AltiGen MAXCS 7.0 Update 1 ACM Administration User Manual
Page 392: Ct-bus test tool backup and restore utility, Ct-bus test tool” on
Chapter 30: Tools and Applications
376
MaxCS 7.5 Administration Manual
CT-Bus Test Tool
The CT-Bus Test Tool is a tool that detects one-way connection, cross talk, bad MVIP cable and static noise
problems.
To run the CT-Bus test tool,
1.
Stop AltiGen Switching Services before running this utility.
2.
Launch CT-Bus Test Tool from Start > All Programs > MAXCS > Gateway Tools > CT-Bus Test Tool.
3.
Click Start to begin the test.
4.
At the end of the test, the utility provides pass or fail results.
Backup and Restore Utility
Note:
The configuration backup option is turned on by default.
Backups do not include CDRs.
To back up or restore data, select either
•
From MaxAdmin: Services > Utilities > Backup and Restore, or
•
From the Windows Start menu: All Programs > MAXCS > Utilities > MAXCS ACC/ACM Backup and
Restore.
Figure 221.
Backup and Restore window
Note:
The Backup and Restore window can only be accessed at the primary MAXCS system; it is not
available from a remote MaxAdmin client.
Backing Up Files
Note:
The AltiGen backup utility does not back up internal CDR database. You must back up the internal
CDR database from \AltiDB\InternalDB\Internal.mdb manually.