AltiGen MAXCS 7.0 Update 1 ACM Administration User Manual
Page 424
Appendix A: E1-R2 and E1 ISDN PRI Installations
408
MaxCS 7.5 Administration Manual
Figure 234.
Physical Layer
Consult your CO for “Frame Type,” “Line Code,” or “Zero Code Suppression.” Do not check the Sys-
tem Clock Master
check box because the CO is a clock provider, and our system is synchronized to the
CO. If all configurations are correct, the status should be shown as “OK,” as in Figure
3.
Click the Protocol button in the Channel Group Configuration dialog box to open the Protocol
Configuration window.
4.
Select Regular ISDN PRI as the Span Type, and select the Switch Mode according to your country in the
ISDN PRI Setting
field, and click OK.
Figure 235.
Data Link layer
What you should select in the B Channel Maintenance Message list depends on what country you reside in
(see Table