Sip trunk group configuration, See figure – AltiGen MAXCS 7.0 Update 1 ACM Administration User Manual
Page 160
Chapter 12: Trunk Configuration
144
MaxCS 7.5 Administration Manual
Figure 88.
SIP Trunk Configuration dialog box and Edit box
To edit a line, click the Edit button, fill in the blanks, and click OK.
•
SIP Server IP Address
– The SIP Trunk service provider’s server IP address
•
User Name
– Assigned by the SIP Trunk service provider
•
Password
– Assigned by the SIP Trunk service provider
•
Domain
– The Domain Name of the SIP Trunk service provider, if required
•
SIP Register Period
– How frequently the AltiGen system needs to send SIP registration packets to the
service provider. This can detect if the service provider is up or not. Some service providers do not accept
SIP Register messages. In these cases, you can disable sending SIP Register messages from MAXCS
by setting the SIP Register Period to 0.
•
SIP Trunk Profile
– Select the appropriate SIP trunk profile. (See “Creating a SIP Trunk Profile” on page
•
SIP Source Port
– For SIP UDP, select the source port from 5060 or 10060. For TCP or TLS, you cannot
change ports. Using a port other than 5060 will prevent SIP-ALG firewall/router from changing the SIP
packets.
•
SIP Destination Port
– A SIP Trunk can have different source port and destination port.
•
Automatic NAT Traversal
– Leave this box unchecked.
•
Enable Channel
– After all above parameters are entered correctly, check this box to activate the
channel. The AltiGen system will send authentication to the service provider to verify the setting.
To copy the information in one row to other rows, select the row and click Copy To. Then select the rows you
want to copy the information to, using CTRL+click and Shift+click to select several rows. Click OK.
To delete a row, select it and click Delete.
SIP Trunk Group Configuration
You can configure trunk groups so that SIP devices can exchange their status. By sending a “keepalive”
message and checking for a valid response, SIP devices will know whether remote peers are ready to receive
a new request.