AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 357)

When Information May Be Out of Sync
MaxCS 7.5 Administration Manual 341
To configure Global Least Cost routing,
1.
Click the Global LCR Button.
2. On the Global LCR screen, click the Add button.
3. Fill in the dialog box, and click OK.
Parameter Description
Enable Check this check box to enable the configuration.
E.164 Number Pattern
E.164 is the ITU standard format for international telephone numbers.
Enter a country code and area code. For example, the number pattern
for a site in Fremont, Calif., would be 1510 (the country code 1, followed
by the Fremont area code 510).
Calling From Select the server from which the call originates, or select All Servers .
Transit Through Select the server that receives the call.
4. After adding a route, click Edit, check the Enable check box, and click OK to activate the Global LCR
route.
To edit an entry made to the Global Least Cost Routing table, select the entry you want to change, and click
the Edit button. Make your changes, and click OK.
When Information May Be Out of Sync
If a server is down for any length of time, such that changes may have been made in the VoIP domain and the
server is now out of sync with the Master, you need to update the server manually. In the server’s MaxAdmin,
select VoIP > Multi-Site Domain Configuration, and click the Replicate from Domain button. This brings
the server up-to-date with the Master.
If the server is still not seeing all the information it should (this would be rare), click VoIP > Refresh Enterprise
Configuration
.