About fax-over-ip hunt groups – AltiGen MAXCS 7.0 Update 1 ACM Administration User Manual
Page 257
About Fax-over-IP Hunt Groups
MaxCS 7.5 Administration Manual 241
Figure 140.
Huntgroup Configuration, Queue Management tab
The default audio peripheral setup is discussed in “Audio Peripheral Configuration” on page 62. Setting a cus-
tom configuration in the Queue Management tab involves selecting other available phrases from the lists. De-
pending on how long the caller is in the queue, the caller will hear phrases 1-5, in order, after which phrase 5
will be repeated. For information about creating custom phrases, see the section Auto Attendant Configuration.
About Fax-over-IP Hunt Groups
MaxCS 7.5 supports FoIP Hunt groups; there is no specific configuration type for such hunt groups.
In a FoIP hunt group, all group members must be FoIP extensions. Group queuing is not supported.
Limited FoIP group parameters are supported:
•
First/Last Name, Password, Description, Department
•
DID Number
•
Ring First Available Member and Ring Next Available Member
•
Busy Call Handling and No Answer Handling should be disabled
•
Forwarding All Calls – forwarding target must be a FoIP extension or FoIP Hunt group
Configure FoIP Hunt groups as you would any other type of Hunt group; include only FoIP extensions.