AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 391)

MaxCS 7.5 Administration Manual 375
C H A P T E R
30
Tools and Applications
MAXCS comes with the following tools and applications for testing, diagnosing and configuring your system.
They are available from the Windows Start menu: Start > All Programs > MAXCS ACC/ACM:
Under Gateway Tools:
• AltiGen Board Test
• CT-Bus Test Tool (formerly MVIP Test Tool)
• Gateway Configuration Tool (For information on this tool, see “Gateway Configuration Tool” on page 73.)
Under Utilities:
• MAXCS Backup and Restore Utility
• MaxAdmin and Extension Security Checker
• Start and Stop All AltiGen Services
• Trace Collector
• Voice File Converter
• Read Config
In addition, on the Services > Utilities menu in MaxAdmin:
• Work/Hunt Group Converter utility
• Export and Import extensions utilities
If you installed AltiGen’s Custom Phrase Manager, it is available off the Start > All Programs menu. You can
use this tool only if you have an AltiGen SDK license.
AltiGen Board Test
This is an AltiGen hardware test tool for system hang and other hardware-related problems. It tests the
following on all AltiGen boards:
• Board memory from host or from both host and DSP
• DSP internal memory from host or from both host and DSP
• FMIC connection and data memory from host
• NVRAM from host
• PMC chip from host and DSP if T1/E1 board
You have the option of testing a single board or testing all boards at the same time.