AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 198)

Chapter 15: Extension Configuration
182 MaxCS 7.5 Administration Manual
Figure 112. Triton Analog Station Line Properties dialog box
Configure the following hardware extension-specific features:
Parameter Description
Caller ID Signal Format
Message format with which to send Caller ID information:
• None
• SDMF – Single Data Message Format for supporting and sending a single
data type, such as phone numbers.
• MDMF – Multiple Data Message Format for supporting and sending
multiple data types, such as name and number information. (Default for
US/Canada installation.)
• DTMF – Dual Tone Multi-Frequency, composed of high and low
frequencies, for touch tone dialing.
Message Waiting Signal
Type
Type of Message Waiting indicator for the phone set:
• None
• FSK/SDMF – Frequency Shift Keying/Single Data Message Format
indicator.
• FSK/MDMF – Frequency Shift Keying/Multiple Data Message Format
indicator. (Default for US/Canada installation.)
Flash Duration
Specifies the Flash Duration time in milliseconds:
• 85-750 (default)
• 50-600
• 100-700
• 150-800
• 200-900
• 300-1000
Ringing Frequency (Hz)
Select the frequency in Hz that is necessary for the equipment attached to
this line: 28 (default) or 20.
Line Disconnect Signal
The loop current break desired for answering supervision. Range 600-1000
ms
(1000 ms is default).