AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 328)

Setting VoIP Codec Profiles
312 MaxCS 7.5 Administration Manual
Figure 178. The IP Codec sub-tab showing devices and their assigned codecs
To open a window where you can set or modify codec profiles, click the Codec button in the Enterprise
Manager toolbar.
Figure 179. Codec profile setting window in Enterprise Manager
Named codec profiles are listed on the left.
To create a new profile,
1.
Click the Add button.
2. Name the new profile and click OK. Make your changes, and then click OK.
The next two tables describe the Codec parameters.
Codec Parameter Description
Codec Profile Table
Lists codec profiles by name. Select a profile in the table to modify its
settings, then click Apply in the panel where you made the changes.
Click the Add button to add a codec profile. Click the Remove button
to remove the selected profile. You cannot remove the Default profile.
Name
Name of the codec profile. You can modify the name, and click Apply.
The Default profile name cannot be changed.