AltiGen MAXCS 7.0 Update 1 ACM Administration - Manual (Page 210)

Chapter 15: Extension Configuration
194 MaxCS 7.5 Administration Manual
Figure 119. Extension Configuration, Restriction tab
Note: You can use Apply to to apply call restriction settings to one, some, or all extensions. See “About the
Apply To Button” on page 176 for more information on using Apply to.
Setting Call Restriction Options
You can use one of the following options in setting restrictions on an extension or on multiple extensions using
Apply to
.
• No Restrictions on Outcalls
• Internal Calls Only – extension-to-extension.
• Internal, Local, and Unrestricted Area Codes – Allow extension to call internal, local, and area codes
defined in the Unrestricted Area Codes in the Call Restriction tab of the System Configuration window.
• Allow Internal/Local/Unrestricted, and Defined Prefixes – In addition to the above privilege, allow the
extension to call prefixes you specify in the Prefixes Allowed boxes. Include all relevant prefix numbers
(for example, if appropriate, you would include 1+area code before the number). This configuration will not
override System Prohibited Prefixes set in System Configuration.
• All Calls Allowed Except the Defined Prefixes – In addition to System Prohibited Prefixes, you can
block this extension from dialing the numbers defined in the Prefixes Disallowed boxes.
Setting Other Call Restrictions
Other call restriction rules can deny or allow the following: