Adding a vpn, Modifying basic vpn settings, Undeploying vpns – H3C Technologies H3C Intelligent Management Center User Manual
Page 93: Adding a
{
VSI ID—Enter the VSI ID of a VLL or VPLS VPN. This field supports fuzzy matching.
{
PW ID—Enter the PW ID of a VPN. This field supports fuzzy matching.
{
VPN Status—Select a VPN state. Options are All, Critical, Major, Minor, Warning, Normal,
Unknown, and Unmanaged.
{
VSI Admin Status—Select a VSI state. Options are All, Enabled, and Disabled.
4.
Click Query.
The VPN list displays all the matching VPNs. To clear the query results, click Reset.
Adding a VPN
This function supports adding VPLS, VLL, and PBB VPNs.
To add a VPN:
1.
Click the Service tab.
2.
From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
3.
Click Add.
4.
Click one of the following options.
{
Deploy VPLS VPN. For information about deploying a VPLS VPN, see "
."
{
Deploy VLL VPN. For information about deploying a VLL VPN, see "
."
{
Deploy PBB VPN. For information about deploying a PBB VPN, see "
Modifying basic VPN settings
L2VPN Management provides basic and advanced VPN settings. Basic settings include the VPN name,
contact, description, and audit interval. Advanced settings include information about PEs, ACs, VLAN
mappings, and alarms.
To modify basic VPN settings:
1.
Click the Service tab.
2.
From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
3.
Click the Modify icon
of the target VPN.
4.
Modify the following settings:
{
VPN Name—Enter a new VPN name.
{
Contact—Enter a new contact.
{
Description—Enter a new description.
{
Audit Interval (in hours)—Enter a new audit interval in the range of 0 to 24. An audit interval
of 0 disables audit function.
5.
Click OK.
Undeploying VPNs
You can undeploy an entire VPN or some devices and links in a VPN.
83