beautypg.com

Modifying an mpls te tunnel, Viewing the network topology of an mpls te tunnel, Configuring traffic access – H3C Technologies H3C Intelligent Management Center User Manual

Page 186: Configuring traffic access procedure

background image

1.

Query for the MPLS TE tunnel that you want to delete.

2.

In the MPLS TE Tunnel Query List section of the page, mark the check box on the same line as the
MPLS TE tunnel that you want to delete, and then click the Delete button.

3.

Click OK.

Modifying an MPLS TE tunnel

To modify an MPLS TE tunnel:

1.

Query for the MPLS TE tunnel that you want to modify.

2.

In the MPLS TE Tunnel Query List section of the page, click the Modify icon

on the same line as

the tunnel that you want to modify.

Viewing the network topology of an MPLS TE tunnel

To view the network topology of an MPLS TE tunnel:

1.

Query for the MPLS TE tunnel of which you want to view the network topology.

2.

In the MPLS TE Tunnel Query List section of the page, click the Topology icon

on the same line

as the tunnel for which you want to view the network topology.

Viewing detailed information about the ingress device of an MPLS TE tunnel

To view detailed information about the ingress device of an MPLS TE tunnel:

1.

Query for the MPLS TE tunnel that uses the ingress device you are interested in.

2.

In the MPLS TE Tunnel Query List section of the page, click the name of the ingress device under the
Device Name column.

Viewing detailed information about the MPLS TE tunnel

To view detailed information about the MPLS TE tunnel:

1.

Query for the MPLS TE tunnel that uses the ingress device you are interested in.

2.

In the MPLS TE Tunnel Query List section of the page, click the name of the MPLS TE tunnel under
the MPLS TE Tunnel Name column.

Configuring traffic access

After you have created a TE tunnel and have it operational, you should make sure that traffic is
introduced to the tunnel so that data can be forwarded along the tunnel. You can enable the TE tunnel
to forward traffic in three ways: Static Routing, IGP Shortcut, and Forwarding Adjacency.

Configuring traffic access procedure

To configure traffic access:

1.

Click Service > MPLS TE Manager > Traffic Access Mng from the tabular navigation system on the
top of the IMC main page.

176