H3C Technologies H3C Intelligent Management Center - Manual (Page 219)

2. In the Explicit Path List section of the page, click Add.
The Add Explicit Path page appears, as shown in
Figure 94 .
Figure 94 Usage scenario 5 — Add Explicit Path page
3. Click Select next to Device Name, specify part or the entire name of Router A, and then click Query.
Devices that match the description appear in the Device Query List section of the page. Select
Router A and click OK.
4. In the Explicit Path Name field, enter the name of the explicit path.
5. Select Enabled from the Enable State list.
6. Click Next.
7. On the Next Hop Info List page, click Add.
The Next Hop Info page appears, as shown in
Figure 95 .
Figure 95 Usage scenario 5 — Next Hop Info page
8. In the Next Hop Address field, enter the in interface address of Router B.
9. Select Include from the Next Hop Include Policy list.
10. Select Strict from the Next Hop Strict Loose Policy list.
11. Click OK. Information about your next hop displays in the Next Hop Info List section of the page.
209