H3C Technologies H3C Intelligent Management Center - Manual (Page 231)

Figure 115 Usage scenario 6 — Configure Path Policy page
g. Click Select next to Explicit Path, select the explicit path that you have just created, then click
OK.
h. Click Next. You are directed to the Configure Advanced Attributes page.
i. Click OK. This tunnel appears in the MPLS TE Tunnel Query List section of the page.
To introduce traffic to the tunnel:
1. Click Service > MPLS TE Manager > Traffic Access Mng from the tabular navigation system on the
top of the IMC main page.
2. In the Access Traffic List section of the page, click Add.
The Traffic Access Type Selection page appears, as shown in
Figure 116 .
Figure 116 Usage scenario 4 — Traffic Access Type Selection page
3. Click Select next to Device Name, enter part or the entire name of Router A and click the Query
button. Devices matching this description appear in the Device Query List section of the page.
Select Router A, and then click OK.
4. Click Select next to Tunnel Name, enter part or the entire name of the tunnel that you have just
created in the Tunnel Name field, and then click Query. Tunnels matching this description appear
in the Tunnel Info List section of the page. Select the tunnel that you have just created, and then
click OK.
5. Click Next.
6. Click Complete. The traffic access is added successfully and appears in the Access Traffic List
section of the page.
221