H3C Technologies H3C Intelligent Management Center - Manual (Page 71)

{
PE Interface—Description of the PE interface.
{
Attached CE—Name and IP address of the CE device to which the SA belongs.
{
CE Interface—Description of the CE interface.
Querying SAs
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Traffic Monitor > SA Traffic Monitor Setting.
The SA List page appears.
3. Enter or select one or more of the following query criteria:
{
SA Name—Enter a SA name. MPLS VPN Management supports fuzzy matching for this field.
{
Monitor Status—Select a monitor state from the list. Options are All, Monitored, and Not
Monitored.
{
Attached VPN—Enter the name of the VPN to which the SA belongs. MPLS VPN Management
supports fuzzy matching for this field.
4. Click Query.
The SA List displays all SAs matching the query criterion.
Adding monitor
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Traffic Monitor > SA Traffic Monitor Setting.
The SA List page appears.
3. Select one or multiple SAs to be monitored.
4. Click Add Monitor.
Removing monitor
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Traffic Monitor > SA Traffic Monitor Setting.
The SA List page appears.
3. Select one or multiple SAs and click Remove Monitor.
A confirmation dialog box appears.
4. Click OK.
VPN traffic report
You can view the VPN traffic statistics in the VPN traffic report after VPN traffic monitor is enabled. The
report shows the incoming traffic and outgoing traffic trends of a VPN.
Viewing VPN traffic list
1. Click the Service tab.
61