H3C Technologies H3C Intelligent Management Center - Manual (Page 39)

− Max. Value—Maximum value of the monitored traffic.
− Current Value—Current value of the monitored traffic.
− Average Value—Average value of the monitored traffic.
− Min. Value at—Time when the minimum value of the monitored traffic appears.
− Max. Value at—Time when the maximum value of the monitored traffic appears.
− Valid Sampling Point—Number of the monitored valid sampling points.
The function and format of the outgoing traffic report are the same as those of the incoming
traffic report. Details are not shown.
{
CE-CE link
CE-CE Link contents
− Attached SC of the link—SC to which the CE-CE link belongs.
− Local CE—Name and IP address of the local CE.
− Opposite CE—Name and IP address of the remote CE.
To add a CE-CE link to the service topology:
i Click Add on top of the CE-CE list. The Add Topology Link page appears.
ii For the Left Node field, click Select. The Select CE window appears. Select a CE device and
click OK to return to the Add Topology Link page.
iii For the SC field, click Select. The Select SC window appears. Enter the SC name in the SC
Name field and click Query. Select an SC in the SC List and click OK to return to the Add
Topology Link page.
iv Click Add on top of the Right Node List area. The Select CE window appears. Select the CE
name in the CE Name field and click Query. Select one or multiple CE devices in the CE List
and click OK to return to the Add Topology Link page. Repeat this step to add multiple right
nodes.
v Click OK.
To remove a CE-CE link or links, select one or multiple links and click Remove.
Area 4: Recent 10 unrecovered alarms
This area is always displayed no matter which tab you click.
Recent 10 unrecovered alarms contents
{
Severity—Alarm level, Critical, Major, Minor, Warning, or Info.
{
Source—Device that sends an alarm message.
{
Alarm Information—Detailed information about the alarm.
{
Alert Time—Time when the alarm occurred.
{
Device Role—Role of the device that sends the alarm message, P, NPE, SPE, UPE, MPE, VPE, CE,
VMCE, or MCE.
To view all alarms, click the All Alarms link on the upper right of the area. For information about
the all alarms function, see H3C IMC Base Platform Administrator Guide.
29