H3C Technologies H3C Intelligent Management Center - Manual (Page 49)

{
Device IP—Enter the PE IP address. MPLS VPN Management supports fuzzy matching for this
field.
{
PE Type—Select a PE type. Options are All, PE, SPE, UPE, and MPE.
4. Click Query.
The PE Device List displays all PE devices matching the query criteria.
5. Click Reset to clear the query criteria and display all PE devices.
Synchronizing PE devices
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > PE Device List.
The PE Device List page displays all PE devices.
3. Select one or multiple devices to be synchronized and click Synchronize.
4. The Synchronization Status field in the list displays the synchronization process of the devices.
5. Click Refresh to view the latest synchronization result.
Switching PEs between regions
Perform this task to move PE devices from a region to another region in the same AS. P devices do not
support this function.
To switch PEs between regions:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > PE Device List.
The PE Device List page displays all PE devices.
3. Select one or multiple devices to be switched and click Switch.
The AS/Region window appears.
4. Select a region.
5. Click OK.
Removing PE devices
Perform this task to remove PE devices from MPLS VPN Management.
To remove PE devices:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > PE Device List.
The PE Device List page displays all PE devices.
3. Select one or multiple devices to be removed in the list and click Remove.
A confirmation dialog box appears.
4. Click OK.
39