H3C Technologies H3C Intelligent Management Center - Manual (Page 58)

Query connectivity information No No Yes
Troubleshoot No No Yes
Audit all VPN connectivity No No Yes
Analyze MPLS VPN traffic No Yes Yes
Viewing device VPN information
Perform this task to go to the device VPN information page from the VPN global topology page, and to
view detailed VPN information for a device. This function is available on the global topology and an
access topology. Take the global topology for example:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Global Topology.
The VPN Global Topology page appears.
3. Right-click a PE device and select Device VPN Information from the shortcut menu.
The PE VPN Information page appears.
4. The page consists of the Found SA List area and the Recent 10 unrecovered alarms area.
Found SA List contents
{
VRF—VRF information, including VPN instance name, RD, import RTs, and export RTs.
{
Bound Interface—Name and IP address of the interface that is bound with the VRF.
{
Connected MCE—Name and IP address of the MCE that connects to the VRF.
{
Connected CE—Name and IP address of the CE that connects to the VRF.
{
Configure Audit Status—Last audit configuration result. Options are Link invalid, Configuration
unchanged, and Configuration changed.
Recent 10 unrecovered alarms contents
{
Severity—Alarm level, Critical, Major, Minor, Warning, or Info.
{
Alarm Information—Detailed information about the alarm.
{
Alert Time—Time when the alarm occurred.
Viewing VPN link information
Perform this task to view detailed information about a link in the global topology or an access topology.
Take a global topology for example:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Global Topology.
The VPN Global Topology page appears.
3. Right-click a link and select VPN Link Information from the shortcut menu.
The VPN Link Details page appears.
4. The tabs displayed on the page vary with the link types.
48