H3C Technologies H3C Intelligent Management Center - Manual (Page 252)

Viewing detailed information about an LSP
You can view detailed information about an LSP, including the topology diagram, path list, path outgoing
interface, incoming interface, outgoing label, incoming label, and the next hop IP address.
To view detailed information about an LSP:
1. Click Service > MPLS Management > LSP Management from the tabular navigation system on the
top of the IMC main page.
2. Click an LSP name in the LSP List section of the page.
NOTE:
If an LSP is discontinuous, some of the LSP path sequence numbers are not displayed. On the topology, the
discontinuous links of the LSP are displayed as red broken lines.
Topology Management
With the Topology Management function, you can display the MPLS global network topology, display
LSPs between devices, and highlight LSPs.
To access the Topology Management function:
1. Click Service > MPLS Management > Topology Management from the tabular navigation system
on the top of the IMC main page.
MPLS topology tool bar
Figure 122 MPLS topology tool bar
You can use the following tools to view the topology:
• Displays the LSP List section on the topology view page, including LSP status and LSP name. You
can also query for existing LSPs by their names.
• Allows you to add a link on the topology view.
• Allows you to unhighlight a highlighted link.
For more information, see H3C Intelligent Management Center Base Platform Administrator Guide.
Using Topology Management
The Topology Management function provides you with a visual tool to view the MPLS network structure.
With the Topology Management function, you can do the following:
• Manage links on the topology.
• Manage devices on the topology.
• Deploy LSPs on the topology.
242