Deploying a service, Deploying all links, Removing deployment configurations – H3C Technologies H3C Intelligent Management Center User Manual
Page 60
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Global Topology.
The VPN Global Topology page appears.
3.
Click a CE device and click the Highlight Vpn icon
in the tool bar on top of the topology.
Devices and links that belong to the VPN are highlighted. Others are grayed.
4.
Click the Cancel Highlight icon
to cancel highlighting the VPN.
Deploying a service
Perform this task to deploy an SA for a PE device on the global topology.
To deploy a service:
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Global Topology.
The VPN Global Topology page appears.
3.
Right-click a PE device and select Service Deploy from the shortcut menu.
The Add SA page appears. For more information, see "
Deploying all links
Perform this task to deploy all links that are not deployed on the global topology. Undeployed links are
displayed as dotted lines on the topology. Deployed links are displayed as full lines.
To deploy all links:
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Global Topology.
The VPN Global Topology page appears.
3.
Right-click the blank and select Deploy All from the shortcut menu.
Deployment information is displayed in the log area below the topology.
Removing deployment configurations
Perform this task to remove an SA link from the global topology.
To remove deployment configurations:
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Global Topology.
The VPN Global Topology page appears.
3.
Right-click an SA link and select Remove Deployment Configuration from the shortcut menu.
The Remove Deployment page appears.
50