H3C Technologies H3C Intelligent Management Center - Manual (Page 151)

− Modify—Click the Modify icon to enter the Select Device page. Select a CE device and
click OK to return to the New Links List.
c. Select multiple links to be added to L2VPN Management.
d. Click Finish.
The Summary page displays the VPN link configuration results.
VPN Link Configuration Result contents
• Device Label—Label and IP address of the PE device.
• VPN Name—Name of the VPN.
• PE Interface—Name of the PE device's interface that connects to the CE device.
• CE Name—Name of the CE device.
• Result—Result of the VPN configuration, Success or Failure.
L2VPN topology
The L2VPN topology shows connections between PEs and CEs for each L2VPN. You can view L2VPN
information for a PE device, view information about an AC, remove an AC, and audit a VPN.
Entering L2VPN topology
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > L2VPN Topology.
The page that shows the topology appears.
Viewing a specific VPN topology
1. On the toolbar at the top of the topology page, click the VPN List icon.
The VPN List tab appears at the right of the topology.
2. Enter or select one or more of the following query criteria:
{
Name—Enter the VPN name.
{
Type—Select a VPN type from the drop-down list. Options are All and BGP.
3. Click Query.
The VPN List displays all VPNs matching the query criteria.
4. Click Reset to clear the query criteria, and display all VPNs.
5. Double click a VPN in the VPN List.
The topology for the VPN is displayed.
141