H3C Technologies H3C Intelligent Management Center - Manual (Page 57)

Method 1: From the global topology
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > Global Topology.
The VPN Global Topology page appears.
3. From the navigation tree on the page, select MPLS VPN > VPNFullMesh > Service Topology.
Double-click the service topology node below an MPLS VPN.
Method 2: From the BGP/MPLS VPN list
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Click the Service Topology link for a VPN.
Method 3: From the VPN details page
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Click the name link of a VPN to enter the VPN details page.
4. Click the Service Topology link on the upper right of the page.
Topology operations
Table 1 shows the operations that you can perform for MPLS VPN on the topologies. For information
about other operations that can be performed on the topologies, see H3C IMC Base Platform
Administrator Guide.
Table 1 Support for MPLS VPN operations on topologies
Operations Global topology Access topology Service topology
View device VPN information Yes Yes No
View VPN link information Yes Yes No
Highlight/Cancel highlight a VPN Yes No No
Auto discovery Yes No No
Deploy a service Yes No No
Deploy all links Yes No No
Remove deployment configurations Yes No No
Remove a device from a VPN Yes Yes Yes
Test VPN connectivity between devices Yes Yes Yes
Audit link connectivity No No Yes
47