H3C Technologies H3C Intelligent Management Center - Manual (Page 114)

automatically box, click the Modify icon in the New Link List to manually specify a CE
device for a link.
b. View the New Links List.
New Links List contents
− Device Label—Label and IP address of the PE device.
− VRF Name—Name of the found VRF.
− PE Interface—Name of the PE's interface that connects to the CE device.
− Service Instance ID—ID of the service instance.
− CE Name—Name of the CE device.
− Modify—Click the Modify icon to enter the Select Device page. Select a CE device and
click OK to return to the New Links List.
c. Select multiple links to be added to L2VPN Management.
d. Click Finish.
The Summary page displays the VPN link configuration results.
VPN Link Configuration Result contents
• Device Label—Label and IP address of the PE device.
• VPN Name—Name of the VPN.
• PE Interface—Name of the PE device's interface that connects to the CE device.
• CE Name—Name of the CE device.
• Result—Result of the VPN configuration, Success or Failure.
L2VPN topology
The L2VPN topology shows connections between PEs and CEs for each L2VPN. You can view L2VPN
information for a PE device, view information about an AC, remove an AC, and audit a VPN.
Entering L2VPN topology
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > L2VPN Topology.
The L2VPN topology page appears.
Viewing a specific VPN topology
1. On the toolbar at the top of the topology page, click the VPN List icon.
104