Querying acs, Deleting acs, Auto discovery – H3C Technologies H3C Intelligent Management Center User Manual
Page 149: Auto, Discovery
Querying ACs
1.
Click the Service tab.
2.
From the navigation tree, select L2VPN Manager > VPN Resources > AC List.
3.
Enter or select the following query criteria:
{
PE Name—Enter a PE name. This field supports fuzzy matching.
{
Attached VPN—Enter a VPN name. This field supports fuzzy matching.
{
CE Name—Enter a CE name. This field supports fuzzy matching.
4.
Click Query.
The VPN list displays all the matching ACs. To clear the query results, click Reset.
Deleting ACs
This task deletes ACs from L2VPN Management but the deleted ACs still exist in the network.
1.
Click the Service tab.
2.
From the navigation tree, select L2VPN Manager > VPN Resources > AC List.
3.
Select ACs from the AC list.
4.
Click Delete.
5.
Click OK in the popup window.
Auto discovery
The auto discovery function collects configuration information from PE devices to obtain all existing
L2VPNs and links, draws the L2VPN topology, and add the VPNs to L2VPN Management.
To automatically discover a VPN:
1.
Click the Service tab.
2.
From the navigation tree, select L2VPN Manager > Auto Discovery.
The auto discovery configuration guide page appears.
3.
Select PEs:
a.
Enable Synchronize PE device before auto discovery for Auto Discovery Parameter Settings.
b.
Click Select PE for Auto Discovery Range Settings.
The Select Devices dialog box appears.
There are two methods for selecting devices, By View or using the Advanced option. See
"
Adding Devices by Advanced Query
."
c.
Highlight the devices you want to select and do one of the following:
−
To add them to the Selected Devices list, click Add selected .
−
To select all of the devices displayed in the Devices Found list, click Add all .
−
To remove one or more, select them and click Remove selected .
139