H3C Technologies H3C Intelligent Management Center - Manual (Page 82)

Configuring the management VPN
Assume that the management VPN has been deployed on the network.
To configure the management VPN:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Mgt. VPN Configuration.
The Mgt. VPN Configuration page appears.
3. Configure the following parameters:
{
Status—Select Enabled from the drop-down list.
{
HUB's Import RT—Enter 200:1.
{
HUB's Export RT—Enter 200:2.
4. Click OK.
Adding VPN 2
Adding AS 100
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Region management.
The AS List page displays all ASs.
3. Click Add on top of the AS List area.
The Add AS dialog box appears.
4. Enter AS 100 in the AS Name field and enter 100 in the AS Number field.
5. Click OK.
Importing PEs and P devices
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > Region management.
The AS List page displays all ASs.
3. Click the AS 100 link in the list.
The Sub-region/PE Device List page appears.
4. Click Import PE on top of the Sub-region/PE Device List area.
The Import Device page appears.
5. Enable Filter devices according to AS number.
6. Click Select and select PE 1, PE 2, PE 3, and PE 4.
7. Click OK to return to the Sub-region/PE Device List page.
8. Click Import P on top of the Sub-region/PE Device List area.
72