H3C Technologies H3C Intelligent Management Center - Manual (Page 35)

5. Click OK.
Removing VPNs
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Select the VPNs to be removed.
4. Click Remove on top of the BGP/MPLS VPN List area.
A confirmation dialog box appears.
5. Click OK.
Auditing VPNs
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Select the VPNs to be audited.
4. Click Audit on top of the BGP/MPLS VPN List area.
5. You can view the audit results in the topology, the VPN list, or the operation log after the audit is
finished.
Modifying audit intervals
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Select one or multiple VPNs whose audit intervals need to be modified.
4. Click Modify Audit Interval on top of the BGP/MPLS VPN List area.
The Modify Audit Interval dialog box appears.
5. Set whether to enable Connectivity Audit. Options are Periodical audit and Not Audit. If Periodical
audit is set, you can modify the audit interval and set whether to enable Audit Inter-Spoke
Unconnectivity. The value range for the audit interval is 2 to 168 hours, and the default is 8 hours.
6. Click OK.
Editing VPN details
Perform this task to display detailed information about an MPLS VPN, including SAs, SCs, PEs, CEs, and
links.
To edit a VPN:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
25