Enabling mpls or mpls ldp for interfaces, Batch enable mpls or mpls ldp for interfaces, Ldp management – H3C Technologies H3C Intelligent Management Center User Manual
Page 242
NOTE:
The Interface Description and Interface IP fields support fuzzy match.
Enabling MPLS or MPLS LDP for interfaces
Use this function to enable MPLS and MPLS LDP for an interface of a device that has been imported to the
MPLS management.
1.
Click Service > MPLS Management > Device Management from the tabular navigation system on
the top of the IMC main page.
2.
Locate and click the Operation icon
of a device entry, and then select Configure MPLS/LDP for
Interface from the operation menu. The interface configuration page for the selected device
appears.
3.
Click the Configure MPLS/LDP for Interface icon of an interface entry.
4.
Select Enabled for MPLS Status and MPLS LDP Status, respectively.
5.
Click OK.
NOTE:
You cannot enable MPLS LDP for an interface when the MPLS status of the interface is Disabled.
Batch enable MPLS or MPLS LDP for interfaces
Use this function to batch enable MPLS/MPLS LDP for multiple interfaces on a device. Before you use this
function, make sure the device has been imported to the MPLS management.
1.
Click Service > MPLS Management > Device Management from the tabular navigation system on
the top of the IMC main page.
2.
Locate and click the Operation icon
of a device entry, and then select Configure MPLS/LDP for
Interface from the operation menu. The interface configuration page for the selected device
appears.
3.
Select one or more target interfaces, and then click the Enable MPLS/LDP button in the upper-left
corner of the Interface Information List.
4.
Select Enabled for MPLS Status and MPLS LDP Status, respectively.
5.
Click OK.
NOTE:
You cannot enable MPLS LDP for an interface when the MPLS status of the interface is Disabled. You must
enable the MPLS first.
LDP Management
LDP management is used to manage LDP peers which include local peers and remote peers. By enabling
MPLS LDP for devices, remote LDP peers must be created on devices manually, while local LDP peers can
be created through automatic discovery. Local peers are discovered through the basic discovery
232