Topology operations, Viewing device vpn information, Viewing pw information – H3C Technologies H3C Intelligent Management Center User Manual
Page 115: Viewing ac information, Removing an ac
The VPN List tab appears at the right of the topology.
2.
Enter or select one or more of the following query criteria:
{
Name—Enter the VPN name.
{
Type—Select a VPN type from the drop-down list. Options are All, VPLS, VLL, PBB, and
VPLS+PBB.
3.
Click Query.
The VPN List displays all VPNs matching the query criteria.
4.
Click Reset to clear the query criteria, and display all VPNs.
5.
Double click a VPN in the VPN List. The topology for the VPN is displayed.
Topology operations
Viewing device VPN information
1.
Right-click a PE device.
2.
Select L2VPN Info from the shortcut menu.
The page for the L2VPN information appears. For information about L2VPN information, see
"
Viewing L2VPN information on a PE
."
Viewing PW information
1.
Right-click the PW between two PEs.
2.
Select PW Info from the shortcut menu.
The page for the PW information appears. You can view the PW connectivity status, left device,
right device, PW type, PW encapsulation type, and failure reason on the page.
Viewing AC information
1.
Right-click the AC between a PE and a CE.
2.
Select AC Info from the shortcut menu.
The page for the AC information appears. For information about AC information, see "
."
Removing an AC
1.
Right-click the AC between a PE and a CE.
2.
Select Undeploy from the shortcut menu.
A confirmation dialog box appears.
3.
Click OK.
The line that represents the AC changes to a dotted line, which indicates that the AC is being
undeployed.
4.
After a short period of time, right-click the blank and select Reload from the shortcut menu.
105