H3C Technologies H3C Intelligent Management Center - Manual (Page 48)

PE device list
Use this function to query, synchronize, switch, remove a PE device, and view the VPN information for the
device.
NOTE:
The initial PE device list is blank. Before you view and manage PE devices, use the region management
function to import PE devices to MPLS VPN Management.
Viewing the PE device list
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > PE Device List.
The PE Device List page displays all PE devices.
PE Device List contents
{
Status—Alarm state of the device, Critical, Major, Minor, Warning, Normal, Unknown, or
Unmanaged.
{
Device Name—Name of the device. Click the name link of the device to view its details.
{
PE Type—Type of the PE device, PE, SPE, UPE, or MPE.
{
AS Number—Number of the AS to which the PE device belongs.
{
Region—Name of the region.
{
Device IP/Mask—Management IP and mask of the PE device.
{
Last Synchronization Time—Time when the last synchronization occurred.
{
Synchronization Status—Synchronization state of the PE device, Synchronizing, Success, or
Failure.
{
View—Click the View icon to view the SA information and alarm information for the device
in the PE VPN Information page.
3. Click Refresh to view the latest PE Device List.
Querying PE devices
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > PE Device List.
The PE Device List page displays all PE devices.
3. Enter or select one or more of the following query criteria:
{
Device Name—Enter a PE name. MPLS VPN Management supports fuzzy matching for this
field.
{
Status—Select the alarm state of the PEs to be queried. Options are All, Critical, Major, Minor,
Warning, Normal, Unknown, and Unmanaged.
38