H3C Technologies H3C Intelligent Management Center - Manual (Page 92)

Managing VPNs
The VPN list shows all VPN services, including VPLS, VLL, PBB, and VPLS+PBB VPN services. You can add,
modify, delete, and audit VPN services from the VPN list.
Viewing the VPN list
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
VPN List contents
{
Status—State of the VPN. Options are Critical, Major, Minor, Warning, Normal, Unknown,
and Unmanaged.
{
VSI Admin Status—State of the VSI, Enabled or Disabled.
{
VPN name—Name of the VPN. You can click a VPN name to view details about that VPN.
{
VSI ID—VSI ID for a VLL or VPLS VPN.
{
I-SID—I-SID for a PBB VPN.
{
PW ID—PW ID for a VLL or VPLS VPN.
{
VPN Type—VPN type. Options are VPLS, VLL, PBB, and VPLS+PBB.
{
B-VLAN—B-VLAN for a PBB or VPLS+PBB VPN.
{
Topology—Provides a Topology link for you to view L2VPN topology.
{
Audit Time—Time when the last VPN connectivity audit was performed, in the format
YYYY-MM-DD hh:mm:ss.
{
Audit Result—Result of the last VPN connectivity audit. Options are Unaudited, Normal,
Auditing, Unknown, Unconnected, and Error. If the result is Unconnected, you can click the
Unconnected link to view the cause.
{
Modify—Provides a Modify icon for you to modify basic settings for a VPN.
3. Click Refresh to view the latest VPN list.
Querying a VPN
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Resources > VPN List.
3. Enter or select one or more of the following query criteria:
{
VPN name—Enter the name of a VPN. This field supports fuzzy matching.
{
I-SID—Enter the I-SID of a PBB VPN. This field supports fuzzy matching.
{
VPN Type—Select a VPN type. Options are All, VPLS, VLL, PBB, and VPLS+PBB.
{
Audit Result—Select an audit result. Options are All, Unaudited, Normal, Auditing, Unknown,
Unconnected, and Error.
82