H3C Technologies H3C Intelligent Management Center - Manual (Page 241)

1. Click Service > MPLS Management > Device Management from the tabular navigation system on
the top of the IMC main page.
2. Locate and click the Operation icon of a device entry. The operation menu appears and lists
all the operations that you can do.
3. Click Traffic Configuration in the operation menu to display the Configure Device Traffic Statistics
page of the device.
4. Select Enable or Disable.
5. Enter statistics interval in the Traffic Statistics Interval (s) text box.
6. Click OK.
Viewing device label statistics
This function enables you to view label usage statistics of a device, including the Number of Used Labels,
Number of Unused Labels, and the Label Usage Percentage.
To view device label statistics:
1. Click Service > MPLS Management > Device Management from the tabular navigation system on
the top of the IMC main page.
2. Locate and click the Operation icon of a device entry. The operation menu appears and lists
all the operations that you can perform.
3. Click Label Statistics in the operation menu to display the Label Usage Statistics page of the device.
4. Click a link in the Number of Used Labels column to view detailed label usage information.
Three rows in the Label Type field are: Static, Dynamic, and Static and Dynamic. Static labels are
assigned manually to establish a static LSP. Dynamic labels are assigned through label distribution
protocols to establish a dynamic LSP. The value of Static and Dynamic is the sum of Static and Dynamic.
Querying device interface information
This function enables you to query interfaces of a specific device by Interface Description, Interface IP
Address, MPLS Status, and MPLS LDP Status.
1. Click Service > MPLS Management > Device Management from the tabular navigation system on
the top of the IMC main page.
2. Locate and click the Operation icon of a device entry, and then select Configure MPLS/LDP for
Interface from the operation menu. The interface configuration page for the selected device
appears.
3. Enter searching conditions:
• Interface Description—Indicates the description of an interface.
• Interface IP—Indicates the interface IP address.
• MPLS LDP Status—Indicates the MPLS LDP status. Values include: All, Enabled and Disabled.
• MPLS Status—Indicates the MPLS status. Values include: All, Enabled and Disabled.
4. Click the Query button. The Interface Information List displays all the interfaces that match the
searching conditions. Click the Reset button to clear the searching conditions.
231