H3C Technologies H3C Intelligent Management Center - Manual (Page 251)

4. Click OK.
Auditing LSPs
You can audit the connectivity of LSPs whose deployment status is Normal or Undeployment failed.
To audit one or more LSPs:
1. Click Service > MPLS Management > LSP Management from the tabular navigation system on the
top of the IMC main page.
2. Select one or more LSPs that you want to audit.
3. Click the Audit button.
Managing an established static LSP
You can manage an established static LSP, including modifying its description, its LSP configuration
information, and highlighting its paths and nodes on the MPLS topology. If the deployment status of an
LSP is Undeployed or Deployment failed, you can view the reason for such failures.
To manage an LSP:
1. Click Service > MPLS Management > LSP Management from the tabular navigation system on the
top of the IMC main page.
2. Click the Operation icon in the same line as the LSP that you want to modify, as shown
in Figure 121 .
Figure 121 Manage an LSP
3. You can do the following operations:
• Click Modify Description to modify description of the LSP.
• Click Modify LSP to modify configurations for the LSP, including paths, outgoing label values,
LSP name, and LSP description.
• Click Highlight to highlight all links and nodes of an LSP on the MPLS topology, so that you
can intuitively know the devices that the LSP traverses. If the LSP is not complete, for example,
some devices are lost, the highlight information may also be incomplete.
• Click Failure Reason to view the reason why an LSP deployment or undeployment has failed.
You can only view LSPs whose deployment status is Deployment failed or Undeployment
failed.
241