H3C Technologies H3C Intelligent Management Center - Manual (Page 250)

Checking labels (optional)
You can use this function to verify the validity of labels that you have configured manually for the devices.
After you have manually configured labels for all devices along the LSP, click the Check Label button. The
system checks whether the labels have already been used on the device. If the labels are not in use, you
can see the icon in the Check Result column. If labels have not been checked, is displayed in the
Check Result column.
Deploying an LSP
1. To deploy the LSP immediately, select the Deploy Immediately check box in the Define LSP section,
and then click OK. To deploy the LSP later, you do not need to select the Deploy Immediately check
box.
2. Click OK.
3. To deploy the LSP later, click Service > MPLS Management > LSP Management.
4. In the LSP List section of the page, select one or more LSPs that you want to deploy, and then click
the Deploy button. If the deployment is successful, the Normal status appears in the Deployment
Status column on the LSP Management page.
NOTE:
Synchronize the devices before deployment to get the latest configuration.
Undeploying one or more LSPs
You can undeploy one or more static LSPs whose deployment status is Normal or Undeployment failed.
To undeploy one or more LSPs:
1. Click Service > MPLS Management > LSP Management from the tabular navigation system on the
top of the IMC main page.
2. Select one or more static LSPs that you want to undeploy.
3. Click the Undeploy button.
4. Click OK.
Deleting one or more LSPs
You can delete one or more LSPs at a time. You can only delete LSPs whose deployment status is
Undeployed or Deployment failed.
To delete one or more LSPs:
1. Click Service > MPLS Management > LSP Management from the tabular navigation system on the
top of the IMC main page.
2. Select one or more LSPs that you want to delete.
3. Click the Delete button.
240