H3C Technologies H3C Intelligent Management Center - Manual (Page 253)

For more information about managing links on the topology and managing devices on the topology, see
H3C Intelligent Management Center Base Platform Administrator Guide.
Highlighting an LSP
To highlight an LSP on the MPLS topology:
1. Click Service > MPLS Management > Topology Management from the tabular navigation system
on the top of the IMC main page.
2. To the right of the topology, click the LSP List tab.
3. Enter part or the full name of the LSP that you want to highlight in the Name field, and then click
Query. All LSPs that match the query criterion are displayed in the LSP List section of the page.
4. double-click the LSP that you want to highlight in the LSP List section of the page. The regions,
devices, and links between the devices associated with the LSP are highlighted on the topology,
and other nodes and links are grayed out.
Viewing an LSP
You can use this function to view an LSP on the MPLS topology, and highlight an LSP between two devices
on the MPLS topology.
To view an LSP:
1. Click Service > MPLS Management > Topology Management from the tabular navigation system
on the top of the IMC main page.
2. Use Ctrl with the mouse to select two devices.
3. Click the Display LSP List icon on the tool bar. A window pops up, listing all LSPs between the
two devices.
4. Select an LSP, and then click OK. The system highlights the selected LSP on the MPLS topology.
Label statistics
With the Label Statistics function, you can display label usage statistics on devices, including the number
of static labels being used, number of dynamic labels being used, and the label usage percentage to see
which devices have high label utilization, in order to lighten burden for these devices in time. You can
also query for a specific device, and view label usage statistics information about the device.
243