H3C Technologies H3C Intelligent Management Center - Manual (Page 142)

5. Highlight the devices you want to select and do one of the followings:
{
To add them to the Selected Devices list, click Add selected .
{
To select all of the devices displayed in the Devices Found list, click Add all .
{
To remove one or more, select them and click Remove selected .
{
To remove all of the selected devices, click Remove all .
6. Confirm that the devices you have found have been added.
7. Click OK to enter the Import Device page.
The selected devices appear in the page.
8. Verify the imported devices.
{
To add more devices, repeat step 4.
{
To delete devices, select one or multiple devices in the PE Devices and click Delete.
9. Click OK.
You can view the import process and results in the Import Device page.
Viewing L2VPN information on a PE
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > PE Devices.
The PE Devices page displays all PE devices.
3. Click the Details icon for a PE to enter the L2VPN information page for the PE.
Discovered VSI List contents
{
VSI Name—Name of the VSI.
{
Protocol Type—Protocol type for the VSI.
{
Import RT—Value of the import RT with which the VSI associates.
{
Export RT—Value of the export RT with which the VSI associates.
{
RD—RD value of the VSI.
{
MAC Learning Status—Whether MAC address learning is Enabled or Disabled.
{
Tunnel Policy—Tunnel policy that the VSI uses.
{
Binding Information—Click the Binding Information icon to enter the Binding Information
page. You can view the binding interface, encapsulation type, service instance ID, bandwidth,
and VLAN ID on the page.
Synchronizing PE devices
This function immediately synchronizes device configurations to L2VPN Management. L2VPN
Management compares the device configurations with the baseline configurations, and displays the
differences in the PE Devices page.
132