H3C Technologies H3C Intelligent Management Center User Manual
Page 113
The Select Devices dialog box appears.
There are two methods for selecting devices, By View or using the Advanced option. See
"
Adding Devices by Advanced Query
."
c.
Highlight the devices you want to select and do one of the following:
−
To add them to the Selected Devices list, click Add selected .
−
To select all of the devices displayed in the Devices Found list, click Add all .
−
To remove one or more, select them and click Remove selected .
−
To remove all of the selected devices, click Remove all .
d.
Confirm that the devices you have found have been added.
e.
Click OK to return to the page for selecting a PE.
f.
Click the Delete icon for the device to be deleted. To delete multiple devices, select the
devices and click Delete.
4.
Click Auto Discovery.
A progress bar for VPN auto discovery appears.
5.
Click Next when the loading is finished.
The VPN selection page appears.
6.
Select VPNs whose links are to be configured:
a.
View the VPN List Found.
VPN List Found contents
−
Status—Status of the found VPN, Existed or New VPN. Existed indicates that the found VPN
already exists in L2VPN Management. New VPN indicates that a new VPN is found.
−
VPN Name—Name of the found VPN.
−
VPN Protocol Type—Type of the found VPN. Options are VPLS, VLL, PBB, and VPLS+PBB. If
the VPN is a BGP VPN, this field displays BGP.
−
ID Value—The ID value in this field depends on the VPN type. It might be the VSI ID, PW ID,
or I-SID. If the VPN type is VPLS+PBB, this field displays the VSI ID and I-SID.
−
PW Transport Mode—Options are VLAN and Ethernet.
−
VPN Description—Description of the found VPN.
b.
Select one or multiple VPNs in the VPN List Found.
c.
Click Next.
7.
Configure VRF binding relationships.
This step configures CE information for the new links.
a.
Select or clear the Create non-managed CE automatically box.
If you select the Create non-managed CE automatically box, the system automatically creates
a non-managed CE for a link without any CE device. If you clear the Create non-managed CE
103