H3C Technologies H3C Intelligent Management Center - Manual (Page 112)

{
MAC Address—Enter the MAC address of the device.
5. Click OK.
Synchronizing CE devices
This function synchronizes the VLAN mappings on the CEs to L2VPN Management.
To synchronize CE devices:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > CE Devices.
The CE Device List page displays all CE devices.
3. Select one or multiple PEs to be synchronized and click Synchronize.
The synchronization results are displayed in the Synchronization Status field.
4. Click Refresh to view the latest CE Device List and view the final synchronization results.
Removing CE devices
Perform this task to remove CEs and VCEs from L2VPN Management. Removing CEs might result in an
incomplete L2VPN or VPN service interruption. H3C recommends verifying the CEs before you remove
them.
To remove CE devices:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > VPN Devices > CE Devices.
The CE Device List page displays all CE devices.
3. Select one or multiple CEs to be deleted and click Delete.
A confirmation dialog box appears.
4. Click OK.
Auto discovery
The auto discovery function collects configuration information from PE devices to obtain all existing
L2VPNs and links, draws the L2VPN topology, and adds the VPNs to L2VPN Management. You can
modify, delete, or removing the VPNs, and deploy links for the VPNs.
To automatically discover a VPN:
1. Click the Service tab.
2. From the navigation tree, select L2VPN Manager > Auto Discovery.
The auto discovery configuration guide page appears.
3. Select PEs:
a. Enable Synchronize PE device before auto discovery for Auto Discovery Parameter Settings.
b. Click Select PE for Auto Discovery Range Settings.
102