H3C Technologies H3C Intelligent Management Center - Manual (Page 208)

Figure 77 Usage scenario 3 — Configure Path Policy page
a. Refer to the explicit path that you have configured, and then click Next. You are directed to the
Configure Advanced Attributes page.
b. Click OK. This tunnel appears in the MPLS TE Tunnel Query List section of the page.
Configure tunnel B in the similar way from Router A —> Router D —> Router C.
To introduce traffic to this tunnel:
1. Click Service > MPLS TE Manager > Traffic Access Mng from the tabular navigation system on the
top of the IMC main page.
2. In the Access Traffic List section of the page, click Add.
The Traffic Access Type Selection page appears, as shown in
Figure 78 .
Figure 78 Usage scenario 3 — Traffic Access Type Selection page
3. Click Select next to Device Name, enter part or the entire name of Router A and click the Query
button. Devices matching this description appear in the Device Query List section of the page.
Select Router A, and then click OK.
4. Click Select next to Tunnel Name, enter part or the entire name of the tunnel that you have just
created in the Tunnel Name field, and then click Query. Tunnels matching this description appear
in the Tunnel Info List section of the page. Select your tunnel, and then click OK.
5. Click Next.
6. Click Complete. The traffic access is added successfully and appears in the Access Traffic List
section of the page.
198