Adding monitor, Removing monitor, Setting sa traffic monitor – H3C Technologies H3C Intelligent Management Center User Manual
Page 70: Viewing sa traffic monitor settings
The VPN List page appears.
3.
Enter or select one or more of the following query criteria:
{
VPN Name—Enter a VPN name. MPLS VPN Management supports fuzzy matching for this
field.
{
Monitor Status—Select a monitor state from the list. Options are All, Monitored, and Not
Monitored.
4.
Click Query.
The VPN List displays all VPNs matching the query criterion.
Adding monitor
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Traffic Monitor > VPN Traffic Monitor
Setting.
The VPN List page appears.
3.
Select one or multiple VPNs to be monitored.
4.
Click Add Monitor.
Removing monitor
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Traffic Monitor > VPN Traffic Monitor
Setting.
The VPN List page appears.
3.
Select one or multiple VPNs and click Remove Monitor.
A confirmation dialog box appears.
4.
Click OK.
Setting SA traffic monitor
Viewing SA traffic monitor settings
1.
Click the Service tab.
2.
From the navigation tree, select MPLS VPN Manager > Traffic Monitor > SA Traffic Monitor Setting.
The SA List page appears.
SA List contents
{
SA Name—Name of the SA.
{
Attached VPN—Name of the VPN to which the SA belongs.
{
Monitor Status—Monitor state of the SA. Options are Monitored and Not Monitored.
{
Attached PE—Name and IP address of the PE device to which the SA belongs.
60