H3C Technologies H3C Intelligent Management Center - Manual (Page 50)

CE device list
Use this function to query, synchronize, switch, and remove a CE device. You cannot synchronize a
non-managed CE.
Viewing the CE device list
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > CE Device List.
The CE Device List page displays all CE devices.
CE Device List contents
{
Status—Alarm state of the device, Critical, Major, Minor, Warning, Normal, Unknown, or
Unmanaged.
{
Device Name—Name of the device. Click the name link of the device to view its details.
{
CE Type—Type of the CE device, CE, VMCE, or MCE.
{
Device IP—IP address of the CE device.
{
Mask—Mask of the CE device.
{
Last Synchronization Time—Time when the last synchronization occurred.
{
Synchronization Status—State of the last synchronization, Synchronizing, Success, or Failure.
Click the Failed link, and a prompt that indicates the failure reasons appears.
{
Modify—Click the Modify icon to modify a non-managed CE. This icon is not displayed for
a manageable CE.
3. Click Refresh to view the latest CE Device List.
Querying CE devices
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Devices > CE Device List.
The CE Device List page displays all CE devices.
3. Enter or select one or more of the following query criteria:
{
Device Name—Enter the name of the CE. MPLS VPN Management supports fuzzy matching for
this field.
{
Status—Select the alarm state of the CEs to be queried. Options are All, Critical, Major, Minor,
Warning, Normal, Unknown, and Unmanaged.
{
Device IP—Enter the IP address of the CE. MPLS VPN Management supports fuzzy matching for
this field.
{
CE Type—Select the type of the CE. Options are All, CE, VMCE, and MCE.
4. Click Query.
The CE Device List displays all CE devices matching the query criteria.
40