H3C Technologies H3C Intelligent Management Center - Manual (Page 79)

c. Click Select VPN on the Select PE and VPN page.
The Select VPN page appears.
d. Select VPN 1 and click OK to return to the Select PE and VPN page.
e. Click Next.
5. Select an SC:
a. Select SC(100:1) in the SC of Current VPN list.
b. Select the Add by HUB handling method.
c. Click Next.
6. Configure the PE and CE.
To configure the PE's interface that connects to the CE:
a. Select Eth1/1 from the Interface Description drop-down list.
b. The interface's IP address and subnet mask of Ethernet 1/1 automatically appear in the
Interface IP/Mask field.
To configure the CE:
c. Enable Create Non-managed CE automatically.
d. Click Next.
7. Configure the VRF information.
The system automatically generates a default VRF name in the VRF Name field.
The system automatically generates a default RD value in the RD Value field.
Click Next.
8. The Summary page includes the Basic Information, Configuration command, and Deploy
Immediately areas. The Basic Information and Configuration command areas help you verify the
configuration before you execute the configuration commands.
a. Enable Deploy Immediately.
b. Click OK to return to the SA List page.
Verifying the configuration
From the navigation tree, select MPLS VPN Manager > VPN Resources > SA management.
The SA List page displays all SAs.
You can see the link deployment status for the newly added SA is Deploying. After the SA is deployed,
the status changes to Normal. You can view the PE3-VCE4 SA in the topology for VPN 1.
Monitoring and viewing the traffic of VPN 1 and the traffic between PE 1 and CE 1
Adding VPN 1 to be monitored
1. Click the Service tab.
69