H3C Technologies H3C Intelligent Management Center - Manual (Page 181)

3. Click Query. All explicit paths that match the query criteria display in the Explicit Path List section
of the page.
4. To clear the query criteria and display all explicit paths, click Reset.
To modify an explicit path:
1. Click Service > MPLS TE Manager > Explicit Path Mng from the tabular navigation system on the
top of the IMC main page.
2. In the Explicit Path List section of the page, click the Modify icon of an unbound explicit path
to enter the explicit path configuration page.
3. Modify the parameters as needed.
NOTE:
You can only modify unbound explicit paths. You cannot modify the device name or the explicit path
name.
To delete one or more explicit paths:
1. Click Service > MPLS TE Manager > Explicit path Mng from the tabular navigation system on the
top of the IMC main page.
2. In the Explicit Path List section of the page, select one or more explicit paths, and then click Delete.
3. Click OK.
NOTE:
Explicit paths that are in Bound state cannot be deleted.
Configuring a dynamic MPLS TE tunnel
To configure a dynamic MPLS TE tunnel:
1. Click Service > MPLS TE Manager > MPLS TE Tunnel Mng from the tabular navigation system on the
top of the IMC main page.
2. In the MPLS TE Tunnel Query List section of the page, click Add.
The Add Tunnel page appears, as shown in
Figure 49 .
171