Auto discovering bgp vpls vpn, Viewing the vpn topology – H3C Technologies H3C Intelligent Management Center User Manual
Page 154
The page for import results appears. You can see that the two PEs are imported.
Auto Discovering BGP VPLS VPN
1.
Click the Service tab.
2.
From the navigation tree, select L2VPN Manager > Auto Discovery.
The auto discovery configuration guide page appears.
3.
Select PEs:
a.
Enable Synchronize PE device before auto discovery for Auto Discovery Parameter Settings.
b.
Click Select PE to select PE1 and PE2.
4.
Click Auto Discovery.
A process bar for VPN auto discovery appears.
5.
Click Next when the loading is finished.
The VPN selection page appears.
6.
Select VPNs whose links are to be configured:
a.
Select VPN bbb in the VPN List Found.
b.
Click Next.
7.
Configure VRF binding relationships.
a.
Click the Modify icon
of the PE1 to enter the Select Device page. Select CE1 and click OK
to return to the New Links List.
b.
Click the Modify icon
of the PE2 to enter the Select Device page. Select CE2 and click OK
to return to the New Links List.
c.
Select those two links to be added to L2VPN Management.
d.
Click Finish.
Viewing the VPN topology
1.
Click the Service tab.
2.
From the navigation tree, select L2VPN Manager > L2VPN Topology.
The L2VPN topology page appears.
3.
On the toolbar at the top of the topology page, click the VPN List icon.
The VPN List tab appears at the right of the topology.
4.
Configure the following query criteria:
{
Name—Enter VPN name VPLS001.
144