Figure 91 – H3C Technologies H3C Intelligent Management Center User Manual
Page 216
Figure 91 Usage scenario 4 — Configure Path Policy page
g.
Click Select next to Explicit Path, select the explicit path that you have just created for the
backup tunnel, then click OK.
h.
Click Next. You are directed to the Configure Advanced Attributes page.
i.
Click OK. The backup tunnel appears in the MPLS TE Tunnel Query List section of the page.
To configure FRR:
1.
Click Service > MPLS TE Manager > Protection Mng from the tabular navigation system on the top
of the IMC main page.
2.
In the Protected Tunnel List section of the page, select the bypass tunnel, and then click FRR
Protection.
3.
Select Link Protection from the Protection Type list.
4.
Click Next.
5.
In the Link List section of the page, select the link that you want to protect.
6.
Click Next.
7.
In the Protected Tunnel List section of the page, select the bypass tunnel, and then click Bound >
Complete. The bypass tunnel is bound with the primary tunnel and disappears from the Protected
Tunnel List section.
8.
You can click the Operation icon
to view detailed information about the protection.
To introduce traffic to the primary tunnel:
1.
Click Service > MPLS TE Manager > Traffic Access Mng from the tabular navigation system on the
top of the IMC main page.
2.
In the Access Traffic List section of the page, click Add.
The Traffic Access Type Selection page appears, as shown in
206