H3C Technologies H3C Intelligent Management Center - Manual (Page 237)

{
Device IP— Indicates the device IP address. This field supports fuzzy match. Select Exact
Query to perform exact query.
{
Device IP List—Click the IP List icon to display the Device IP List Configuration page.
In this page, enter one or more device IP addresses in the Input Device IP text box, and
then click the Add button. Click OK to confirm and go back to the previous page.
{
Device Label—Indicates the device name or label.
{
Device Status—Indicates the device status. Values includes Unmanaged, Unknown,
Normal, Warning, Minor, Major, and Critical. Device Status is determined by the highest
severity or alarm level for the device, when a device has more than one current alarm that
has not been cleared or recovered. Devices that are added to but not managed by IMC
are categorized as unmanaged. Devices whose information cannot be obtained by IMC
are categorized as unknown.
{
Device Category—Indicates the device type. Options include: Routers, Switches, Servers,
Security, Storage, Wireless, Voice, Surveillance, Video, Virtual Devices, Module,
Application Controller, Printers, UPS, Desktops, and Others.
{
Device Series—Indicates devices series.
{
Contact—Indicates the contact information, such as user names or mobile phone numbers,
of the operators who are responsible for the selected devices.
{
Location—Indicates where the devices are located.
{
Device Reachability—Indicates whether a device can be reached. Options include:
Reachable and Unreachable.
{
Query—Click the Query button to display devices meeting the searching conditions in
the Device Found pane.
a. To add one device to the importing list, highlight a single device entry in the Device Found
pane, and then click the Add selected icon
. To add all devices into the importing list, click
the Add all icon . Selected devices appear in the Selected Devices pane.
b. Click OK at the bottom of the page.
4. Click OK to start importing devices. During the importing process, the system displays the
importing result showing when and whether a device has been successfully imported. You can
stop the importing by clicking the Quit Device Importing link in the Operation box.
5. Click the Back button to go back to the Device List view and examine the imported devices.
NOTE:
Only devices that have been added to the IMC platform can be imported to the MPLS management.
Deleting devices
To delete one or more devices from the MPLS management:
1. Click Service > MPLS Management > Device Management from the tabular navigation system on
the top of the IMC main page.
2. Select one or more devices to be deleted.
227