H3C Technologies H3C Intelligent Management Center - Manual (Page 41)

{
Last Audit Time—Time when the last audit occurred.
7. Click the VPN Details link on the upper right of the page to return to the VPN details page.
Troubleshooting
Perform this task to automatically find the faults and causes for disconnected links discovered by
connectivity audit.
This function is supported on H3C Comware V3 devices, Huawei devices, and some Cisco devices, and
it is applicable only when OSPF is used between a PE and a CE.
To do troubleshooting:
1. Click the Service tab.
2. From the navigation tree, select MPLS VPN Manager > VPN Resources > VPN management.
The BGP/MPLS VPN List page displays all VPNs.
3. Click the name link of a VPN to enter the VPN details page.
4. Click the Troubleshooting icon for a disconnected link in the VPN Link Audit Information list.
5. The Troubleshooting List displays the operation and result for troubleshooting.
Troubleshooting List contents
{
Time—Time when the troubleshooting began.
{
Source—Source device for the troubleshooting.
{
Destination—Destination device for the troubleshooting.
{
Result—Result of the troubleshooting, which provides troubleshooting recommendations.
6. Click Back to return to the VPN Audit Details page.
SA management
This function manages the link between a CE and a PE. You can use this function to add, modify, remove,
deploy, and undeploy an SA.
Figure 11 SA management operation process
2
Deploy
SA
3 Maintain
SA
4
Undeploy
SA
5 Remove
SA
1 Add
SA
31